How can i get my slider forward a bit ?

Any ideas how i can get my sliding door forward a bit more The gap towards the rear is tight and the front gap is in need of closing up a bit , Ive undone the 4 bolts on the lock and got a small amont of movement but not enough , I have also at great expense bought a new top of the range seal and its fitted the right way round .

 

Have you tried slackening off the 4 bolts which hold the U link? There's 2 at the back and 2 inside under the rear handle. They give a bit of back to front adjustment.

 

Tried that its not enough

 

Is the gap under the above hinge correct between door and body

Have you had any repairs on the b pillar

 

Bottom runner bracket .needs.moving back.a.bit ??

 

Something stuck in the bottom.track??

 

Have you tried pushing the handle up when the door is shut JD? , it pulls it in.might sound daft but my panel has that system whereas my camper didnt and I wondered about the gap.Hope I'm not teaching granny etc.

 

may have misread your question

 

[quthat's clearkev, post: 660910, member: 2907"]Something stuck in the bottom.track??[/quote]
No thats clear

 

[quote="kev, post: 660909, member: 2]Bottom runner bracket .needs.moving back.a.bit ??[/quote]
It raps around the bottom corner so wont move back

 

What about the block that the rear door mechanism catches on to. Can't remember but that might have some adjustment?

 

I might have a go at putting a couple of shims behind it

 

will that fix it and where can i get one

 

yes i thought as much i was just killing time and teasing