Looked at wheels at weekend and they need a proper clean, didn't want to use my standard wheel foam cleaner due to the black inserts was planning on using autosol to give a high sheen finish, or any recommendations.
Just cleaned mine up.. they were startin to look quite tarnished..not polished them in the fours years they been on the bus. Just normal wash when ive cleaned me bus. Used autosol. And they've come up a treat
If they are the ones in your avatar, they look like JBW/MWS copies which will be Black and polished with a laquer over the top, so most modern alloy wheel cleaners will work quite well, but they are highly corrosive so its a brush on with a stiff brush to loosen the dirt and then a good hose off with water. Hope that helps.
