Hi, For sale is my Weedeater beam, coil-over shocks, dropped spindles and modified torsion arms - all removed from my 68 prototype bay. - The beam is a Creative Weedeater Mk1 (narrowed balljoint 68-80) and was modified by Type 2 Detectives in order for the top adjuster to clear the shift rod. Also included with the beam are the narrowed leaves. The beam measures approx 78cm (outer edge -> outer edge of beam side plates) which I believe makes it the 4" narrowed version. I believe this beam will fit all Bay window buses 68-80, and also all Splitscreen buses 54-67. - The shocks are coil-over units (sourced via T2d) - The dropped spindles are the 'flipped' ball-joint units (sourced via T2d) - The torsion arms are original VW parts - modified (by T2d) for use with the dropped spindles above The above parts - except the Weedeater - were sourced from Type 2 Detectives, and literally have zero road miles on them. The beam does have a little primer over-spray and also a few paint chips from where it was fitted and removed (3 times can you believe it!)... Front (shows new top adjuster)... Back (shows original closed up top adjuster)... Coil-overs... Note: The beam and shocks (pictured above) are in Surrey, but for the moment the torsion arms and dropped spindles are at a workshop in the Midlands area and I don't have any pictures of them. However pictures of these can be found on the T2d website. Link to spindles: http://www.bugwelder-shop.com/t2dshop/product_info.php?info=p33_Dropped-Spindles--Ball-Joint-type.html Bought new the parts above (not including the beam modification) would set you back just short of £1200 but I'm selling the above as a package for £950 I could be interested in trade/plus cash deal - i.e. looking for a very very good used set of earlybay style deluxe bumper trims, or an iPhone5 etc... Also, if you don't want the complete package I would sell items individually. Thank you, Mike