Does anyone know if it is possible to get hold of a new float for a Solex 32/34 PDSIT - 2 carb? Parked on a slight slope, full tank, electric fuel pump and later discovered that petrol was siphoning through the carb. It flooded the entire engine before I discovered it. On stripping the carb I found that the float was heavy with petrol and when gently squeezed leaked along the seam. It's one of two carbs on a twin carb 1800, 1975. Also, I've drained the oil (petrol mix) and am letting everything dry out. Is there likely to be any lasting damage. It's a rolling resto so all work is being considered. Won't be at VanFest in the van as planned but might be needing to visit for some bits! Thanks, John
personally i would squirt a bit of oil down the spark plug holes and turn the engine over for a minute or so with new oil and coiul to dizzy wire off so it doesn`t fire just to work some oil round the bearings . could try eurocarb or ebay