Has anyone got an adapter plate for an empi shifter hurst style.Or could someone give me the measurements and i can make one.Empi don,t seem to sell just the plate. Cheers
It's REALLY simple (presuming you mean the square plate under the shifter). The one I had off of PeaSoup looked like a secondary school metalwork class had made it. If yours is an Empi, I'll remove mine tonight, measure and photograph it. It's essentailly a bit of 10mm x 1mm flat bar bent into a square. (Exact measurements to follow)
Absolutely faultless, despite the serious overloading. Really pleased with the bus aside from the oil leaks but that seems to have calmed down a bit too. I think it's a combination of the oil filler and the dipstick as well as the push rod tubes.
they do come with 2 different adapter plates though, so you will have to work out which one you need. i have them both so i will have a spare once mine has been set up, which i will happily send you if its the one you need
All sorted made mine at work and fitted.Wow what a difference.Nice and tight and short changes!!.Still looked like secondary metalwork but was out of a bit of stainless!!!!. Cheers for your help.
