FOR SALE CSP Type 1 Sump Plate and Oil Temp Sensor

Bought a while back, but never used. Both are brand new.

CSP alloy sump plate for Type 1 engine, angled threaded hole for either standard sump plug or screw-in oil temp sensor. Replaces standard flat plate, cooling fins match fins on crankcase. £22 posted. - SOLD





VDO oil temp sensor. Screws into plate, protected by angled hole. 14mm threads. £12 posted. - SOLD

 

@CollyP

Looking at fitting a temp gauge but must having physio on his disco damaged bod...

 

That looks rather snazzy! Is it meant to make it less prone to leaking oil than a standard Fischer Price one? The plate I mean not the temp sensor.

 

If you've got the gaskets and acorn nuts on, the standard one's don't leak!

 

Mine have always passed a tiny bit on the odd stud. I guess it’s because I don’t go mad when I tighten them up as they are only soft. I snapped one off once but managed to get it out. I have an oil temp sensor sump plug attached. What’s the purpose of the alloy plate?

 

You can use acorn studs with little rubber washers molded into a Groove on the nut. They don't leak.

That's a cheap deal btw

 

Provides some protection if you've got a sump sender.

 

Just an idea but thinking about it your van would wipe that out on the first speed bump / campsite.

As you were ...

Sent from my SM-G960F using Tapatalk

 

Surely its no lower than a normal sump plate?

 

That looks like a good way of getting oil temperature measured.

Seems very good value to me.

 

Where gold ones not available?

 

No but @CollyP 's van is lower than a snakes belly ....


Sent from my SM-G960F using Tapatalk

 

Sent from my SM-G960F using Tapatalk

 

Oooops

Sent from my SM-G960F using Tapatalk

 

I'm sure he would have plated it in gold before fitting!

 

If his current one hasn't been knocked off, then this one shouldn't either!

 

It's the wire catching that could be an issue.
Keith's field reversing at speed was interesting - thought we'd be looking for a new exhaust !!

Sent from my SM-G960F using Tapatalk

 

I’ll take the sender unit if you still have it.