Continental Interior

Discussion in 'Mech Tech' started by Foxy, May 23, 2016.

  1. Is anyone that has a continental interior prepared to take a picture of their sliding door curtain. I bought a set from nlavw and the one for the slider looks really long and has two poppers on it and I don't know where they pop on to.

    Thanks in advance
     
  2. No poppers on mine ...what colour are the curtains ?
     
  3. No poppers on mine either but there are some on the cab window curtains
     
  4. nicktuft

    nicktuft Supporter

    Can take a photo if you want but the curtain on mine had elastic/now bungie and a popper into the the door frame beside the sink, that then clips onto the back of the sliding door frame near the hand grab. The top of the curtain was attached to an aluminium rail so it could be slid to the front door frame and held in place with a westy tie back. Hope that this helps.
     
    Foxy likes this.
  5. It helps a bit. You'll have to bear with me as I bought this interior and put it in to replace a Devon interior.

    So what you're saying is it actually doesn't hang/fit to the door at all, rather the frame and pillar??
     
    nicktuft likes this.
  6. nicktuft

    nicktuft Supporter

    Exactly I'll try to get a photo later and put it up.
     
  7. nicktuft

    nicktuft Supporter

    [​IMG]
    [​IMG]
    [​IMG]
     
    Foxy likes this.
  8. theBusmonkey

    theBusmonkey Sponsor

    That's it!
    So when you stand up & open the door you're lulled into a false sense of privacy.
    You think the curtain is closed, therefore no one can see you...your top half that is...:eek:
     
    chad and nicktuft like this.

  9. Nice one mate, just the thing I was after.
     
    nicktuft likes this.
  10. Green

    They must attach to the pillar
     

Share This Page