Cavity wax holes...

Discussion in 'Mech Tech' started by stevem, Mar 17, 2020.

  1. Ok,
    Can anyone advise the positions of the two holes at the back of the front arch that give access to the sills.
    As shown in this shamelessly stolen photo.
    I know the top hole is 20mm from the top seam and 15mm from the right seam, but any ideas on the bottom hole??

    Yes, I said bottom hole

    Cheers

    Noa0nVa.jpg
     
    CollyP likes this.
  2. DubCat

    DubCat Sponsor

    I think the middle sill is in between the two holes, so they allow access to separate cavities.
     
    paradox and JamesLey like this.

Share This Page