So I ordered the rubber filler neck from Bus ok At a total cost of 47 euros, including postage, after I paid, they sent me an email saying its not 100% correct and would I like to upgrade to an original one at a cost of 80 euros I've asked what the difference is between them, but no response as of yet. Sent from my SM-G981B using Tapatalk
If the picture is correct your fuel filler goes off at an angle on a pickup. If you fit the bus one that goes straight down more or less it will constantly be under tension and split.. But would I buy a 50 year old rubber part? .With the flatter angle you might find other fuel fittings that suit, even a flange welded to an angled tube and marine fuel hose..
I'm not fitting a bus one Mike I've ordered a double cab one from them then they message me asking if I'd like to upgrade to an original. I've requested a picture so I can see the difference. Sent from my SM-G981B using Tapatalk
They have replied with this saying this is the one I've bought. https://bus-ok.nl/T2b-fuel-filler-neck-seal-single-double-cab-08-73-07-79-261201119 Sent from my SM-G981B using Tapatalk
So they’re basically saying ‘we’ve advertised, and you’ve bought, one that’s not really very good’ but that they can also sell you a NOS one if you’d like, for 3x the price? Or are they saying they’ve not got the cheap one in stock, but here’s a sub, for 3x the price?
Yes, exactly , it's okish, but this is better if I want to spend another 60 euros. Sent from my SM-G981B using Tapatalk
I've just requested a refund. I'm going with @stirlingmoz idea and fit a T25 one. If I bought the original one, including postage, it's over 100 euros ridiculous amount for a little bit of rubber. The filler neck on a double cab is so easy to get at I can change it anytime. Sent from my SM-G981B using Tapatalk
