Mot fail on both front callipers (binding /sticky) :-/ Suppose I shouldn’t really complain as they are over 40 yrs old... Any recommendations? Are the bog standard one’s heritage sell Ok? https://www.heritagepartscentre.com/uk/211615107-brake-caliper-front-left.html
I bought the GSF ones with a discount code 2 years ago and they are fine. Sent from my iPad using Tapatalk
If you can wait, I recommend sending your originals off to Bigg Red in Cambridge. They come back like new for about £160 for the pair. You can even choose the colour of the powder coat. Mine before: And after:
Got my repair kit (including new pistons) from here. Seemed a good fit and solid quality: https://m.autodoc.co.uk/spares-search?keyword=D42082C
I'd second refurbing your own - you'll need access to an air line to pop the pistons out, but I'm sure a garage would oblige for a small donation as it only takes a couple of minutes.
Using an air line is dangerous. If they are stuck a grease gun exerts about 1500psi and won’t go bang when it gives
I repaired mine with a kit from Budweg. Very cheap and easy to do. Possibly a better option than new reproduction callipers.
I wasnt advocating aiming it at anyone! I always hold it back with a G-Clamp or block of wood so it just pops but doesnt act like a projectile.