Big Clearout - Can Bring to Bristol Volksfest

Discussion in 'Late Bay Parts Classifieds' started by gvee, May 31, 2012.

  1. Delivery/Collection
    I am coming to Bristol Volksfest so can bring stuff along with me there. I will be there all weekend so even if you're coming for the day we can arrange something :)
    Please note that I will be leaving for the show on the morning of Wednesday 6th so if you want a larger item (body cut, grille, etc) you need to let me know BEFORE so I can pack it. These items will require payment up front also

    Also I am based in Leeds and welcome collection.

    None of these prices include postage but this can be arranged for any item(s) you want for cost.

    Prices
    I don't know what most of this is worth so please tell me if I'm being a tit with pricing.
    Open to offers on any of it :)

    Dibs
    Reply to this thread to register your dibs!

    Pictures
    Click on the smaller pictures to load up a higher resolution version :)
    You can find pictures of everything here: http://s1067.photobucket.com/albums/u434/gvee87/Stuff_For_Sale_Part_2/?start=all

    I have taken pictures of the worst bits of every item. If you think I've missed anything or want different angles or whatever just let me know and I can grab another snap.



    Gear Stick - £7

    No picture just yet. Standard type, includes shifter plate and what not


    Sliding Door Hinge Covers (RHD) - SOLD
    (VW part numbers 224 843 697 B and 224 843 699 A)
    Pretty good condition but sadly one part has two small breaks (see pictures).
    [​IMG]
    [​IMG] [​IMG] [​IMG] [​IMG] [​IMG]


    Washer Bottle - £7
    (VW part number 211 955 453)
    Need to test for leaks but appears super solid.

    [​IMG]
    [​IMG] [​IMG]


    Stove Pipe Tinware - SOLD

    Solid with some surface rust.

    e_Part_2/DSC_0797640x425.jpg" alt="" />
    [​IMG] [​IMG]


    Thermostat Housing - £7
    [​IMG]


    Chrome Engine Lid Lock - £10
    Keyless, single-screw type with minor pitting and comes with cover and rubber seal
    [​IMG]
    [​IMG] [​IMG] [​IMG]


    Various Door Catches - £4 ea
    [​IMG]
    [​IMG] [​IMG]


    Cab Door Check Strap - £7 ea

    [​IMG]
    [​IMG] [​IMG] [​IMG]


    Chrome LED Exhaust Tip - £5

    Untested. Approx 25cm long with a 58mm end. Has a ring of LEDs inside the tip
    [​IMG]
    [​IMG] [​IMG]


    Camshaft - £10
    (VW part number 113 109 111 B)
    Came out of a beetle, seems to be in very good condition

    /DSC_0821640x425.jpg" alt="" />
    [​IMG] [​IMG]


    Beetle Air Filter Parts - £4 pair
    [​IMG]
    [​IMG]


    Door Hinges - 1 cold beer
    Pretty sure they're bug ones?
    [​IMG]


    Beetle Wiper Arm - 1 cold beer
    [​IMG]


    Complete Beetle Handbrake - £6 or a coupla cold ones
    [​IMG]


    Beetle Handbrake parts - Cold'uns
    [​IMG]


    Headlamp Rims? - Cold'uns (noticing a theme here? :lol: )

    Unknown origin. Approx 125mm diameter (see image)

    [​IMG]
    [​IMG]


    Dynamo Stand (Oil Filler not included) - £5
    (VW part number 113 101 211 E)
    [​IMG]
    [​IMG] [​IMG] [​IMG]


    Gear Knobs - £3 ea

    [​IMG]
    [​IMG] [​IMG] [​IMG]


    Cab Door Inner Handles - £5 chrome, £3 plastic

    //i1067.photobucket.com/albums/u434/gvee87/Stuff_For_Sale_Part_2/DSC_0845640x425.jpg" alt="" />
    [​IMG] [​IMG]


    Cab Door Handles - £9 ea (VW part number 211 837 205)
    No keys.
    [​IMG]
    [​IMG] [​IMG]
     
  2. Hella H4 Headlight Unit - £10
    [​IMG]
    [​IMG] [​IMG] [​IMG]


    Fuel Pumps - £7 ea
    Untested.
    [​IMG]


    Shifter Plate & Unknown part - Beer or cider ea
    [​IMG]


    Front Indicator Unit - £7
    [​IMG]
    [​IMG]


    Unknown Seal - £5

    [​IMG]

    [​IMG]



    Dash Top Vents (Only 1 of the short, curved ones left!) - £1.50

    Lots of surface rust but solid
    [​IMG]
    [​IMG] [​IMG]


    Heater Tube - £4

    Not sure if this is off a bus or a beetle but I believe it to be an original. 65mm diameter (see picture)

    [​IMG]
    [​IMG]


    Tailgate Hinge Cover (n/s) - £12
    (VW part number 211 867 529)
    Mucky with some surface scrubbing/scratching (see pictures). Will swap for an o/s one!

    [​IMG]
    [​IMG] [​IMG] /bus_stuff_for_sale/DSC_0439640x425.jpg">[​IMG]


    Original Upper Engine Bay Insulation - £5
    This came out of a 72-onwards van (see the circular indents from the boards) but should fit earlier models. Can measure on request.
    [​IMG]
    [​IMG] [​IMG]


    Over Engine Bay Body Cut - £12 for half, £20 full
    rust free. Half a cut will give you enough to put in a decent fuel sender inspection hatch. Full cut is 50cm x 43cm.
    [​IMG]
    [​IMG] [​IMG] [​IMG]


    Random Over Engine Bay Body Cut - 1 cold beer
    Rust free. From the side by the fuel flap. 43cm x 25cm.
    [​IMG]
    [​IMG] [​IMG] [​IMG]


    Ash tray - £8

    Not certain where this goes but from memory it is not from a microbus middle seat... Therefore I assume it is a bulkhead one, right?

    [​IMG]
    [​IMG] [​IMG]

    EMPI 4-tip Exhaust - £10

    Lots of surface rust. Stainless tips. Appears to be in a good, solid shape. Have been told that these aren't great on a TP but fine for a SP.

    [​IMG]
    /i1067.photobucket.com/albums/u434/gvee87/bus_stuff_for_sale/th_DSC_0553640x425.jpg" alt="" /> [​IMG] [​IMG]


    VW Script Front Grille - £10
    Early style front grille made from stainless steel with "Volkswagen" cut in to it. Not the best picture, I know. Can provide further images on request
    [​IMG]


    Later Style Number Plate Light - 1 cold beer (Hella)
    My old number plate light. As you can see from the pictures it has 2 corners broken off but still fixes on fine with original fittings.
    [​IMG]
    [​IMG] [​IMG] [​IMG]


    Heater Pipe Rubber - SOLD
    (VW part number 111 819 945)
    Fits around heat exchanger and body pipes that the heater pipes then fit over to give an air tight fit

    [​IMG]
    [​IMG]
     
  3. Hi ya

    Have an early late bay if that makes sense, is a 72 build, will the front grille fit, or can you give us measurements to check please?

    Cheers
     
  4. It's sat outside on my '72 crossover, so yeah, should do :)
    It fits low indicator models
     
  5. Ours is high indicator with late front panel. Could you measure it for us please and how much posted?

    Thanks
     
  6. It will fit, as in height and width are the same but later style grilles have square corners and early ones have more rounded ones so I don't think this won't look right for yours, sorry!
     
  7. davidoft

    davidoft Sponsor

  8.  
  9. Also have a rear bench seat and 3-seater middle seat to go now that I have a camping interior to go in. PM me if you're interested in these :) Can't take these to the show though as they won't fit in the motor I'm headed in so would have to be a more northern arrangement :lol:
     
  10. Monday bump :)
     
  11. hey buddy, im guessing that exhaust is for a bettle not a late bay? is that right? :eek:
     
  12. The EMPI 4 tip fits type 1 engines - so bugs and earlier bays.
     
  13. Bump :)
     

Share This Page