WANTED Aussie late bay wiper mech / motor

Is it definately the motor, the spindles do seize from time to time

 

You can pop the link arms off without removing the rack. Once they're not connectes to the motor give the arms a wiggle and you'll soon know

 

If you struggle could you not pop out the grommets and move them across to the other holes then replace your mech with a normal euro one?
Just thinking out loud?
let us know how you get on as I have an OZ one

 

Just out of interest mate I looked on the JK Australia site, they are selling the same bits as the uk and they appear interchangeable, motor and spindles within the oz wiper frame ?

 

Lube them right up

 

wire them the other way and they go backwards did you never play with fans and motors etc in mecanno?

 

Course if you fit euro wiper arms you'll get the sweep in your vision line, you aussies and us leftys get a nicer sweep pattern

 

When you get it out will be interesting to see if all the components are just left hand drive?

 

I brought a new motor and fitted to a 74 bay, The wipers had not parked when it broke I guess. When I tested it the wipers went down, not up.
I guess they can be altered by altering the fixing as it comes out the motor.

Nip across to the sweary site vzi and send speedy Jim a pm.
My new motor came with different colour wires and 1 extra, he said not seen that before but still told me what wires went to where, I basically rewired my bus via him. He will know the answer to your issue.

 

I have a complete LHD wiper mech, you can buy all the parts new to rebuild yours, the park needs to be set up on the motor, its a case of a adjusting the position of the crank arm, trial and error but not to tricky

 

You could give Billy at G'day Kombis a ring. He should know.

 

he knows nowt and is a widgy

but he may know

 

He may be a widgy but he does have a lot of Aussie vans kicking about :baggy:

 

Having reviewed the evidence my money is now on right hand parts all fitting within the OZ frame,