Hi Can anyone tell me or show me a photo of how the a post bottom attaches to the crossmember? I have all the parts and I know how the panels sit together but I don’t know where all the welds go...
This bit? The odd u-shaped bit sits inside the valance, and is then welded to both: the a pillar (seam weld you can see along the bottom, and the plug welds up the back). The valance (seam weld you can see along the back, and plug welds at the bottom). I believe I also plug welded it to the top part of the valance in a similar fashion.
Yes that’s the bit. I have the 3 piece repair kit and have assembled all 3 bits but the old one is so corroded that I can’t see where all the welds go. This is a great help-it’s kind of how I pictured it, is this welded the same as the old one came apart? Cheers @JamesLey
Yeap, identical to the original. Managed to find some pics of our heavily rusted original. You can see the u shaped bit sat inside the valance. I used it to position the a pillar repair before chopping it out. I wasn’t so lucky on the other side though. Sent from my iPhone using Tapatalk