17" Fuch reps will they fit?

Hey folks,

I'm looking at the following wheels -

http://www.midlandwheels.com/Shop/P-4190-7-x-17-JBW-Foosh-Black/Hand-Polished---5x112.html

Was wondering if I would have issue on a lowered bay with adjusters on the back and front?

 

Yep I think so as the PCD is 5 x 112. Porsche is 5 x 130 normally and you would need adapters. But VW is 112. You may nex a low profile tyre if yours is sitting very low

 

What about the offset will I have any issues with the lip on the back?

 

What about the offset will I have any issues with the lip on the back?

 

I will be running Gladys on 17" rims on the rear and i worked out that a 40 profile tyre will do the job for me -

 

What tyres out of interest?

 

And what load rating?

 

I may be able to get you a set with a bit of discount , I know a man

 

wheels or tyres

 

wheels

 

here ya go

http://thelatebay.com/index.php?threads/17-inch-fuch-replicas.21458/

 

Cheers but I can get them cheaper than that have to say by end of the week if i want then but at this moment in time wheels at the top of the list paint is :/ but they are sooooo cheap! Don't know what to do!!!

 

the wheels i have are ET50 Rear and ET55 front 17"

alo this is what i fitted

2 x 17 x 7 (195/45 Tyres) Fronts
2 x 25mm 5x112 to 5 x130 adapters (fronts)
2 x 17 x 8.5 (215/50 tyres) Rears
2 x 18mm 5 x 112 to 5 x 130 adapters (rears)
20 Refurbished porsche bolts with collars.

not sure if this information will help but fingers are still crossed

Oh and currently running stock height.