1641cc Beetle engine

Discussion in 'Mech Tech' started by vinnyboy, Nov 29, 2013.

  1. vinnyboy

    vinnyboy Supporter

    I've dug my old beetle out of a 5 year slumber in my mothers garage so will have a few questions for the technical chaps.

    Can i run the 1641cc motor on a standard 1600 carb ?

    Whats the best way to set the ign. timing with a 009 dizzy ?

    thats it for now. :thumbsup:
     
  2. simple answer is yes, and read this

    although I'd recommend using a Vac/mechanical dizzy with a stock carb TBH

    You will also need to make a mark on the crank pulley that corresponds to 30 before Top dead centre...this will get you started

    009s like to be between 27-32 degrees of advance

    Here's another useful link
     
    Last edited: Nov 29, 2013
    madpad likes this.
  3. vinnyboy

    vinnyboy Supporter

    Thanks vanorak. I'll read those fully. Good info there. I would prefer a vac dizzy but for now its got a 009 and its fitted with Petronix ign. Funds are tight for this car. Camper is still No. 1 (for now)
     

Share This Page