hi guys, I cannot get the rear rod coupler off at all , I’ve undone the self tapping nut and its free to turn 90 degrees and I have been using a screwdriver in the side of the coupler and it’s just turning and turning . the bolt through the middle won’t come out. What am I doing wrong? Any ideas ?
You mean you can't get the weird tube thing with the "wing" ends out? Tap it out with a punch from the non-folded over end.
Which way around does the bush sit on the rod? I have the bush with the two plastic nibs on and the metal ring! Is it open end and the metal ring in the sleeve first?
I’m really struggling to get the bush back in the sleeve , The shuttle cock style bush with the splayed end with the wire has to go back into the sleeve , how do you push it back in when it’s so snug?
Can someone please tell me where this rubber goes ? There wasn’t any left of the original so I don’t know where it went? I’m doing the gear linkage I have the picture diagrams but that doesn’t really show where it goes properly!
That was quite a task replacing the bushes and rubbers and new rear coupler !! I fit a new scat gear stick too . I’ll take it out tomorrow now and see what’s it’s like.