What is missing??

Discussion in 'Mech Tech' started by Day, Sep 18, 2020.

  1. Day

    Day

    Hi.
    Had this little knocking again.
    On investigating I took off front small belly pan and found a wet open tube end, metal, runs all the way to back to above gearbox from what I see.

    Looks like something should be there,
    What missing? [​IMG][​IMG]

    Sent from my MAR-LX1A using Tapatalk
     
  2. Day

    Day

    Pics looking up front next to handbrake lever/cable.
    This opened tube is above handbrake cable linkage.
     
  3. It’s the front end of the gear selector shaft. It’s fine, you’re not missing anything.
     
    Day, Zed and Iain McAvoy like this.
  4. Day

    Day

    Thanks.
     
  5. If you waggle the gear stick, you’ll see it move in and out.
     
    Day likes this.
  6. Zed

    Zed Gradually getting grumpier

    How long are your arms?
     
    Razzyh, Day, Coda and 4 others like this.
  7. Or your neck?
     
    snotty and PanZer like this.
  8. Quite long, but not that long.
     
  9. Zed

    Zed Gradually getting grumpier

    Mobile phones are so useful.
    Look down your carb throat.
    Film stuff underneath while you wiggle from afar.
    Watch your valves with a £5.99 add on camera or look in your gearbox.
    :)
     
    Day and snotty like this.
  10. Now that's a good idea! Got a link?
     
  11. I think that's the tube you remove to get a full "stirring porridge" effect that people expect:D
     
    Day likes this.
  12. Day

    Day

    I don't have that stirring porridge effect.
    Changes gear nice and easy... Remembering to pause in neutral during change.
     
    Surfari likes this.
  13. Zed

    Zed Gradually getting grumpier

    snotty and Shep Woof Woof like this.

Share This Page