The All New, New "What have you done to your Bay today" thread.

Discussion in 'General Discussion' started by top banana racing, Aug 27, 2015.

  1. Ok will do but even a misfire would have a registration mark from the firing pin
     
    Lasty and snotty like this.
  2. Soggz

    Soggz Supporter

    DDC505DF-6E1B-4730-93FD-FC855BBC9B27.jpeg Trying to fix my cab floor mat. It tore, getting it out! Contact glue and rubber patches. See if it works! £99.00 now, do if this don’t work, it’s gonna be black carpet!
     
  3. JK carpet ones are a good replacement - about 30 quid ...

    :hattip:
     
    Soggz likes this.
  4. Removed all filler and paint. Found no real rust just poor butt welding joints. Also found after someone ran into us 5 years ago insurance specialist didnt replace corner.
    Hopefilly will be 50kgs lighter now.[​IMG][​IMG][​IMG][​IMG][​IMG][​IMG][​IMG][​IMG][​IMG][​IMG]

    Sent from my SM-A405FN using Tapatalk
     
  5. mikedjames

    mikedjames Supporter

    Cut some more holes in the underside of the poptop for lighting wiring . One for each switch and one additional one to get past a strengthening rib on the way to just over the cooker.

    20200530_114534.jpg

    Hole for getting past stiffening rib.

    20200530_114531.jpg

    Front light fitting hole

    20200530_114543.jpg

    Rear light fitting hole
     
    PanZer and Lasty like this.
  6. Soggz

    Soggz Supporter

    37C72519-E15B-462E-B70E-9CB031EDC289.jpeg 294C1EB7-7907-4F8E-8E4C-FB05E9FE29EB.jpeg
    Yes, thanks. I just looked em up. this one hasn’t worked out too bad, though.
     
    PanZer, nicktuft and Little Nellie like this.
  7. Did more painting [​IMG]

    Sent from my ELE-L09 using Tapatalk
     
    Day, PanZer, MK-Bay and 5 others like this.
  8.  
  9. Very nice! What paint are you using?
     
  10. Collected it from MEB after it was lowered (French Slammer 11cm-narrowed beam and adjustable rear springplates), then looked at it in the sun!

    [​IMG]
     
    Soggz, Lila, CollyP and 6 others like this.
  11. Soggz

    Soggz Supporter

    6465E2BD-D471-4E09-93AE-08E503EC44D5.jpeg New backing plates. Had to re-drill the holes, as there were none in the right place. 5213502F-3ECE-4159-AA81-E2AA32A3174E.jpeg
     
    Last edited: Jun 1, 2020
  12. Yep, the Brazilians moved the holes on the replacement ones.
     
  13. Zed

    Zed Gradually getting grumpier

    Checked my valve gaps, which were all good so that was a load of lying in the muck getting oily and sun burned for nothing. I'm not bitter though. :)
    Exhaust all coming off tomorrow, there a leak somewhere, there's far too much popping and banging while engine braking...people are staring, it's embarrassing.
     
    Little Nellie likes this.
  14. I've undercoated in zinc phosphate primer which is awesome stuff - 3 coats of it.

    Then i had some single pack/enamel hybrid made up in vw Taiga Green / sage green to match my van.

    Ignore the slight bit of welding i need to dox but the finished result is good.

    I'm putting clear stone chip over it before winter

    Sent from my ELE-L09 using Tapatalk
     
  15. Picture didn't upload [​IMG]

    Sent from my ELE-L09 using Tapatalk
     
    MK-Bay and nicktuft like this.
  16. Looks good!
     
    MR SAM HODSON likes this.
  17. mikedjames

    mikedjames Supporter

    Filled it up with petrol for 3rd time since lock down. I think that actually makes about 400 miles driven because I did two half tank fillups first.

    My daily driver is booked for MOT this Thursday having had its MOT expire on 17th March.
     
    Little Nellie and grandmst like this.
  18. I thought Mots were suspended for six months


    Sent from my iPhone using Tapatalk
     
    snotty likes this.
  19. I think he needed an excuse to use the van more - makes a fine office @mikedjames :thumbsup:

    :hattip:
     
    paul2590 likes this.
  20. MorkC68

    MorkC68 Administrator

    Really pushed the boat out today :eek:

    Replaced the short fuel tank to steel filler pipe house as the existing one had cracked, went remarkably well, the tank strap bolts undid nicely, which was a surprise.

    To really push the boundaries, I changed the four breather hoses on the fuel tank, the previous ones crumbled away, looks like they didn't get changed a few years back.

    Its all happening quickly here in Lawrence County :D
     
    Faust, DubCat, paulcalf and 3 others like this.

Share This Page