When I was daft enough to fit a twin choke carb on my type 4 I changed the metal tube for a piece of rubber tubing so that it could go anywhere ( within reason)
Comes on Thursday. It was going to arrive today but I asked Richard to delay it as no one home to accept parcel.
Just about to order a whole load of items from your list - do you know how many are needed and lengths of pipe etc? Cheers Car builder solutions part numbers for the top Tee: Straight Brass 8mm Hosetail 1/8 NPT SKU: HT188: https://www.carbuildersolutions.com/uk/straight...ail-18-npt In-Line Temp Sender Housing/Air Bleed/Drain 38mm SKU: INT38: https://www.carbuildersolutions.com/uk/in-line-...drain-38mm AutoSiliconhoses.com 38mm - 1 1/2" - Silicone Polyester Reinforced Hose - 1 Metre Length - Select Colour Colour Black P SSH 038 K: http://www.autosiliconehoses.com/silicone-polye...lours.html Alloy T Piece Joiner - Polished Alloy T Connector - Choose Your Size Outer Diameter 38mm ATP 038: http://www.autosiliconehoses.com/al...ished-all...-size.html Silicone Polyester Reinforced Hose - Straight Reducer - 25mm to 16mm - 15 Colours Colour Black: http://www.autosiliconehoses.com/si...straight-...lours.html 16mm - Custom Alloy Straight Hose Joiner - Choose Your Length - Beaded Length 100mm AHJ 100 016: http://www.autosiliconehoses.com/cu...6mm-choos...ional.html
Also what do you think about fuel pump, my current one is about 6-7psi or should I get something like this? Facet Red Top Style Fuel Petrol Diesel Pump Kit Universal High Flow rete tuning 12V Electric MarkUK HRF-027 https://www.amazon.co.uk/dp/B01BF650H0/ref=cm_sw_r_cp_api_GGcpAb448ZENT
Nope you need a 3 bar at least fuel pump. I'll find a link: https://rover.ebay.com/rover/0/0/0?mpre=https://www.ebay.co.uk/ulk/itm/391375853988 This is the one I bought, first one got noisey so I bought a spare and fitted it the other week. Have kept the nosiey one as a spare. They're cheap enough to buy two and Carey one as a spare
Hi Matt, just checking that i need this ^^^ in additional to my list, I already had 1 x metre of stainless hose and 1 x metre of on the list so do i need two, thought i read somewhere that i'll also need "Top Tee Screw-in Barb 8mm hose" or thats what i have written down - any ideas? Is this any good for the water hose or should i try and get the plastic T25 hoses so they can be cut down, running from rear to front, should that be hard plastic or will this be ok? http://www.autosiliconehoses.com/16...ter-hose-1-metre-to-50-metres-blue-black.html having looked at the heater blower, this seems to be the one you have: http://www.t7design.co.uk/4-5kw-tenere-performa-3-x-55mm-compact-cab-heater-12.html but i only need 1 (for the cab) maybe 2 (Cab & walkthrough) outlets so presumably you can just block off the outlet(s) I don't use? and switch to match : http://www.t7design.co.uk/fan-knob-3-position-switch-connector-pins.html I thought i read somewhere that i also need 65mm hose for the Air Inlet, i'm going to order the below off eBay, which has also been linked to on here somewhere https://www.ebay.co.uk/itm/Universa...e=STRK:MEBIDX:IT&_trksid=p2055119.m1438.l2649 https://www.ebay.co.uk/itm/RADIATOR...e=STRK:MEBIDX:IT&_trksid=p2055119.m1438.l2649 do i also need http://www.autosiliconehoses.com/plastic-hose-x-cross-piece-joiner-4mm-to-12mm-choose-your-size.html & http://www.autosiliconehoses.com/plastic-hose-joiner-t-piece-3mm-to-19mm-choose-your-size.html or http://www.autosiliconehoses.com/alloy-90-degree-elbow-polished-alloy-bend-joiner.html Thanks
Hi Matt, just checking that i need this ^^^ in additional to my list, I already had 1 x metre of stainless hose and 1 x metre of on the list so do i need two, thought i read somewhere that i'll also need "Top Tee Screw-in Barb 8mm hose" or thats what i have written down - any ideas? Is this any good for the water hose or should i try and get the plastic T25 hoses so they can be cut down, running from rear to front, should that be hard plastic or will this be ok? http://www.autosiliconehoses.com/16...ter-hose-1-metre-to-50-metres-blue-black.html i used normal rubber hose off ebay 10 metres for 30 quid, much cheaper. having looked at the heater blower, this seems to be the one you have: http://www.t7design.co.uk/4-5kw-tenere-performa-3-x-55mm-compact-cab-heater-12.html but i only need 1 (for the cab) maybe 2 (Cab & walkthrough) outlets so presumably you can just block off the outlet(s) I don't use? yes i got this heater, 65mm for the front totem pole. 55mm for the rears, as mine is a westy it has to heater outlets to the rear but you could easily block one off. and switch to match : http://www.t7design.co.uk/fan-knob-3-position-switch-connector-pins.html you need a 4 position switch with the above heater: OFF, speed 1, speed 2 and speed 3 (or Off, Low Med,High) I thought i read somewhere that i also need 65mm hose for the Air Inlet, i'm going to order the below off eBay, which has also been linked to on here somewhere. I used 65mm 90 degree angle(have a look at my thread) but i used a 90 degree as i didnt use a throttle reverser, BUT you may still be able to use a 90 degree to move the air filter to be near the vents. https://www.ebay.co.uk/itm/Universal-Carbon-Fiber-Forced-Cold-Air-Intake-System-3-Filter-Box-Induction-WV/122503564637?ssPageName=STRK:MEBIDX:IT&_trksid=p2055119.m1438.l2649 Yes i used that air filter https://www.ebay.co.uk/itm/RADIATOR-COOLANT-EXPANSION-HEADER-TANK-BOTTLE-RESERVOIR-LEVEL-SENSOR-CAP-TOP-LID/192263990795?ssPageName=STRK:MEBIDX:IT&_trksid=p2055119.m1438.l2649 yep used one of them, not sure how well its working but it seems to do i also need http://www.autosiliconehoses.com/plastic-hose-x-cross-piece-joiner-4mm-to-12mm-choose-your-size.html & http://www.autosiliconehoses.com/plastic-hose-joiner-t-piece-3mm-to-19mm-choose-your-size.html or http://www.autosiliconehoses.com/alloy-90-degree-elbow-polished-alloy-bend-joiner.html 4 way i used to put the breathers into the inlet pipe. t piece not needed. 90 degree bend for the inlet Thanks Answered in red, think its right!!
