Replacing fuel hoses and filters

Discussion in 'Mech Tech' started by Pickles, Aug 15, 2011.

  1. I'm sure before TLB went down there was a detailed how to on this. Perhaps I just thought there was.

    Pickles the bus has a 1700 engine with twin webbers ... what size hose will i need, and what are the best filters to use.

    I know I need to get some proper fule hose clips rather than good ol' jubilee ones ;D

    Baz.
     
  2. My engine is F.I I'll be doing mine after Vanfest, they are only 3 years old but you can't be too careful. I'll do a full picture how too when the time comes. ;)
     
  3. If you havn't seen it already, bung this in your favourites is a very handy rescource, This is the fuel hose page, but if you click on the ratwell square at the top right it'll take you to the home page http://www.ratwell.com/technical/FuelHoses.html

    :)
     
  4. Ratwells is a great site for info :)
     
  5. should have had a look at Ratwells thanks for the reminder

    how do you change karma?
     
  6. Press the plus or minus text below a members avatar where it says karma
     
  7. Just don't forget to replace the hidden breather pipe hidden above the leisure battery! I didn't and ended up with petrol every where!


    [​IMG]
    [​IMG]
     

Share This Page