new wiring was little elf gift real Santa came later and brought some bigger boxes little one is rock and roll bed big one contains more than you see
WANTED: drawings for interior panels LHD/RHD front doors, sliding door, hatch, walls, ceiling any kind
first try to make rear hatch panel. double layer, under is full panel and upper is only frame not glued yet thats why rattan loose
front door panel brown is old one plan is make same way like hatch panel so that brown parts are rattan areas and yellow will be plywood
s.....t happens wrong glue and/or too much (PU glue) no problem will make something with that or new one tools rounded corners and product started to make floor
Anyway options are dark stained back or not stained back. And my vote goes to not stained So hatch panel will be new and natural.
just for visual putting together RR bed. needs lot of work. for straight flat floor needed one layer ply for low section and then second layer from wall to wall still loose needs glue and screws then i can make walls.
Cargo floor insulated and covered with plywood Wheel arcs only insulated Under rr bed will be storage thats why plywood there too
still alive. and van is still there carpet under seat and the seat - rock and roll seat/bed that was .... semi-finished product parts was missing and all was cranky seat back was in wrong angle - too low. ia was cuting here and there and welded all together some paint
these are old MB rims. I searched specifically without vent holes there is two type rims with some minor differents 5+4 pc 4 for van 1 one spare 2 for teradrop trailer and 1 spare please guide me where i can buy center caps for rim center hole 66.6 mm stainless or chrome