Does anyone have a heater riser elbow (part 1) for a t2 bay 1700cc engine and part 29 in the pic below. Its the part that fits onto the driver side heat exchanger and come up through the engine tinware in an 'S' shape and then connects to the card tube to fan. Thanks
I have, I can check condition on Monday, but they should be serviceable or I wouldn't have kept them. £30 posted?
Yes, both parts. I should point out you can buy these new from JK for £52 the pair which isn't bad? http://www.justkampers.com/vw-t2-bay-window-parts/t2-bay-exhaust-parts/heat-riser-elbows-pair.html
Thing is I already have the passenger side heat riser elbow (part 1) so I need the other side too. But mainly it's part 29 I need which is the 'S' shaped part which goes from the top of the heat exchanger to the card hose on the fan.
Yes, Just wanted to make sure you knew what part I was after. Let me know and I'll have these off you. Thanks
Sorry, I looked. Had the one at the back, but it had been welded onto heat exchangers at some point and the clap bit is knackered.
Oh dear, ok. Would you still be able to show me a photo of one so I can see if we can get one made up? I know someone who has offered to fabricate one if I can show them a photo and diagram of one, or maybe the one you have can be repaired? Clutching at straws
Got around the 'part 29' problem. All I need now is the drivers side (RHD) heat riser elbow. Will end up buying pair from JK unless someone has a spare RHD one. Nearly there......
I may have one, I'll have a look over the next couple of days for you. I'm on nights tonight so will be either tomorrow or Tuesday