Fuel tank filler pipe rubbers

Hi
I have just spent the day removing the rubbers from each end of the metal fuel tank filler pipe.

As you can see they are both quite scuppered. I have found a replacement for the one on the left but can't seem to find any ref to the one on the left! It is the section that attaches the pipe to the tank! Anybody any ideas on what to use or where to get one from??

Thanks

 

i'm thinking of this? i heard some of the replacement from jk etc was a poor fit?
http://www.demon-tweeks.co.uk/motorsport/fuel-filler-neck-hose

 

Thanks Ricky, I don't know the quality of the one from custom and commercial but everything else I have bought from them has been good so I have ordered one of those, the piece for the other end you have put a link to looks ace, 57mm bore is right for me with 45 degree angle but not sure which I need, £43.00 one or £21.00 one??? What do you think??

 

i thought yours would be the straight one that heritage do as the bend looks to be in your metal pipe ? i've only ever changed the one ricky says is poo though which is the longer one

this is short early bays (and poss some crossovers)?-
http://www.vwheritage.com/vw_spares...hop.product_pID_196707_lang_EN_country_GB.htm

And this is the long one, later bays and imho is about 20mm too short or was when i last fitted one

http://www.vwheritage.com/vw_spares...hop.product_pID_153800_lang_EN_country_GB.htm

 

It is interesting as my rubber hose isn't straight but it is less than 45 degrees! Do you think I would get away with a straight piece?

 

I JUST BOUGHT BOTH THESE FROM COOLAIR, PLUS THE LOVELY DISCOUNT. ARRIVED NEXT DAY TOO. GOOD PRICE AND SERVICE

 

Thanks very much will take a look

 

DEFO SAME AS MINE, ONE WAS ABOUT 15 QUID, OTHER ABOUT 26. THEN DISCOUNT. THE SLIGHTLY ANGLED ONE DOES COME AS A STRAIGHT PIECE BUT WILL BEND GENTLY WHEN FITTIN

 

Hi Volkswombat
Thanks for the heads up, did you buy the short straight one or the long one with a bend in one end. Also what van have you got? Mines 79 panel van !

 

Sorry are you saying yours are same as mine and you bought the short straight one and it fitted fine?

 

yeah im 79 panel too. cant work out links but filler neck is code 211201119a and tank end short 211201125sho.

 

Spot on thanks ever so much will get on to it!

 

If it is the short straight pipe maybe Heritage need to change their listing as stating 68 - 72 for the short straight is'nt helping anyone out looking for the part for later bay?

 

its a minefield baby!