Dash to voltage reg wire

Discussion in 'Mech Tech' started by lhu1281, Aug 9, 2020.

  1. Which terminal does the wire from the voltage regulator go to the dash G light ??

    Asking for a friend
     
  2. davidoft

    davidoft Sponsor

    yes, blue I think
     
    Coda likes this.
  3. Yes it’s blue ... which terminal does she go
     
  4. The terminal that isn’t connected to +12v. The bulbholder should be insulated from the metal backplate.
     
  5. davidoft

    davidoft Sponsor


    It goes to a bulb holder which you put into the hole that has the generator light
     
  6. bad description on my part .. which terminal on the voltage reg does the blue wire go
     
  7. davidoft

    davidoft Sponsor


    Type 4 engine ? There’s a dangling wire from the regulator, should have 3 terminals on it and one comes back out I think , got a picture of your alternator wiring? And bottom of your regulator?
     
  8. D+ with the red...

    Sent from my SM-T580 using Tapatalk
    [​IMG]
     
    77 Westy likes this.
  9. Voltage regulator was swopped for a new one and yes type 4 engine

    AE20FB61-E33D-4A55-8E65-04F51C31D5BA.png
     
  10. 77 Westy

    77 Westy Supporter

    Voltage regulator.jpg
     
    snotty likes this.
  11. Perfect ...
     
  12. davidoft

    davidoft Sponsor

  13. 77 Westy

    77 Westy Supporter

    But technical terminology can be extremely confusing.:)
     
    DubCat and davidoft like this.
  14. davidoft

    davidoft Sponsor


    I Will try to dumb it down for the Uneducated :D
     
    DubCat and 77 Westy like this.

Share This Page