Discussion in 'VW Services' started by NLAVW, Feb 25, 2014.
Only these bits at the moment. http://nlavw.com/gb/body/72-t2-bay-side-window-grill-protectors.html
So with this worktop...It folds out and is supported at the other end (by something or other)....
does the worktop sit flush with the other surface when opened?
Exactly what I was thinking.......
BTW @NLAVW , this would go down a storm if you could get hold of it for a reasonable price per m.
Mrs Monkey has decided that we "need" this cupboard trim in the white/cream finish but I'm gagging at €13 per m plus postage for the 25m to 30m or so needed.
But then I squeak a lot....
Got that trim on the way, hopefully be with us for Stanford hall. No idea on prices yet tho.
I am looking at
Westfalia steel swing table leg fits Berlin, Helsinki, Dusseldorf etc
Product Code: C9215
to go on a T25 front table bracket that I want put on my bus. Can you let me know the length of the horizontal bit, the height of the vertical bit and the diameter of the pole please?
Will see if i can get it measured for you tomorrow and get back to you, Thanks for your interest
Hello, I'm interested in the 3/4 bed form.
I don't live to far from your selfs, would I be able to pick up?
Won't be for a while anyway.
Yes we are open to public to collect items, just phone before visiting
Helsinki or berlin table base and mid bracket. Can see the pics of them but cant see them on the site. Ive got the table base and leg already.
Hi , all the products are so new we are still putting on website daily, we do have all parts for table, best bet give us a phone call tomorrow, say you spoke to Martin on late bay and they will sort you out with, parts, prices and anything else you need. Thanks.
There is a triangular support that hinges out to support the table
Okay great thanks
On my Campervan 70 , the table folds open inside the van (like in the photo) and is supported on a rubber stop attached to the buddy seat upright. Hope that makes sense
Are your screws and cups for headlining/panels the same size and design as original please? Others I have seen are bigger/different and look odd next to originals. How about the plastic clips for westy jalousie windoes that hold the fly screens, the I shaped jointing strip for joining westy wooden headliner (about 6'' long above the sliding door and jalousie window) and also the plastic pin that goes into the plastic cap over the top bracket on the sliding door?
Prices now added to our website on all these parts, Thanks.
Will chase again this morning, I work away from warehouse 90% of time. Thanks
Measurements: horizontal : 445mm, from the end of the nut to the vertical line of the outside of the vertical pole.
vertical: 650mm, from the end of the pole to the horizontal line of the top side (outside) of the horizontal pole.
The outer-dia for the leg pole is 35mm, , inner is 30mm, wall thickness is 2.5mm.
The top sleeve tube, The outer-dia of the sleeve is 40.4mm, , inner is 35.2mm, wall thickness is 2.6mm.
Hope this helps Ady.
Now got an approx price of £10 metre catologue price comes in 3 colours White/Cream, Black and Grey. obviously we always do show special prices and have regular facebook discount codes etc. Hope this helps, Thanks
Thanks guys, I'll have a proper measure up early next week and then we can talk quantities and prices...
Separate names with a comma.