Best layout for a ply floor

OK - so the commercial marine ply is 2500 by 1220mm and the van is about 1500 squar'ish.

Posts seem to show the main cut set to the forward edge and then a cut which I guess is close to the seat panel - going to fit a Rusty Lee so;

Is that the best cut for a van?

 

I split my cut central for and aft, then put Bamboo flooring in, perfect no movement sits down fine. You don't get flex in such a small area. I don't think the cut is critical...

 

I think just so you've got the cuts under a cabinet or the bed frame. Don't know how Rusty Lee's bolt down but the Westy just has a front panel with rearward side projections that need supporting.
This was how I did it..

https://thelatebay.com/index.php?threads/chip.33075/page-4

 

Get a 10x 5 sheet , no cuts

 

Just found this thread.... when you say bamboo flooring, what is that (please don't say flooring made from bamboo... )

 

Well sorry but it is made of Bamboo, very common in Oz, extremely hard wearing floor in houses. I did our house and put the left over timber in my Kombi.....