So like a novice i took lights out to change panels but didnt take note of where each conecters went . So plugged up where i thought and now got nothing
If no one has given you the info you need by close of play tomorrow ill whip one of mine off and take some photos
If you're getting nothing from any of the lights then it's likely to be the earth for the cluster. There should be a brown wire connected to the cluster that if you follow it terminates on a spade connector on the D pillar. Can't go too far wrong with the order of the wires; just try your brakes, headlights and reverse light. If the wrong light comes on then just switch the wire to the correct light.
Forgot to do this yesterday, so nipped into garage at lunchtime Right hand drive. Drivers side rear light set up Mine may have a different set up as my indicators are at the bottom of the three lights, using an amber bulb showing through the reverse light section! On mine which is Top lamp is brake: black & white wire Middle rear light: top connector red and black wires/orange and black wires. I can't tell if there is a bottom connector or what if anything is going into it. Bottom indicator: top connector green and black wire. Plus black wire. (The second 'black' wire could possibly be red and black its hard to see) Brown wire looks like an earth in the middle of the housing. Red and white wire. Sorry i can't see where it connects to. There will be a wiring diagram somewhere that will help more than what i have written