Just finished making up an dust extraction fitting for a saw table...what a fiddle, should have asked the resident H&V expert @Barneyrubble for his know how.
Put the cover back on the LT- Not an easy job. A bit rewelding to my previous bad weld on the doka cab floor/step join, and am off to Glasgow in a mo.
I've just hoovered a wasps nest from the loft. Come the spring, they're going to be mighty p*ssed off...
Just finished making some more pennal rigs for cod fishing as i caought one off of chesil beach last weekend,and im going again soon,oh and just drank 8 tins of Mackesons...
I've going for 10 m as well, I'd rather it was a bit too long than a bit too short. Why have you only ordered 4 m of the piping? Doesn't it go all the way round the roof to poptop section? I've got some samples coming from http://www.sealsdirect.co.uk/ Blade with 3mm bead. http://www.sealsdirect.co.uk/shopping.asp?intDepartmentId=4#31 ETS 619 just to see if it fits, http://www.sealsdirect.co.uk/shopping.asp?intDepartmentId=3#23 ET57 probably what I'll use, http://www.sealsdirect.co.uk/shopping.asp?intDepartmentId=3#23 I've also got samples coming of Rubber "P" section and rubber "Tadpole" section to see which fits the best between the cap and the van roof.
On mine the piping only goes round the front and back. I don't think a 3mm bead will be big enough. The current one on mine is 6mm. I'll have it tomorrow so I'll let you know what its like.
While playing with the distributor, i managed to get too close to the HT lead from the coil which i had disconnected, #@&# it bites!
Agnello My son's real name is Aniello after his Italian Grandfather. Often confused for lamb by Italians as it is an old name superseded by Angello!