JK's first guinea pig needed!

Discussion in 'General Discussion' started by Josh_JK, Aug 13, 2013.

  1. Don't get me started on solaro_O
    Think @Dicky might be able to lay his hands on a decent dB meter....it'd be good to see exactly what does what...
    I'm just winging it until I get somewhere near.
    Surprised propex haven't offered one tbh...maybe they have and I've just not come across it
     
  2. when i do tv studios we lag with rockwool then three layers of plasterboard tape joints and hang on avs to stop vibration , but you could increase duct size then line with pyrosorb or the fan case with it ................................
     
  3. there's not much resonance from the case itself, but lining (internally) the enclosure where the fan lives makes a difference....ideally you'd put the intake in a different spot, or a different angle, but it's getting mighty complex. If I went to town on it, I'd end up with a whole new case, which defeats the object. Pyrosorb looks good....will make some enquiries:thumbsup:
     
  4. Kingspan do a board which rolls into a duct, you may have used it, you just tape the join and fit connecting collars/bends etc. Havent thought of a use for it yet but might go for heater duct!
     
  5. Hmmmm? it'd be good to sleeve over a silencer but if the shell was made from Ali, with some thin closed cell foam wrapped around the outside, it wouldn't need anymore heat isulation. So you're suggesting using it as ducting from the silencer to the van....or even making square/rectangular ducting out of it, with ali angle to frame it?
    T'would be light and easy to fabricate....:thumbsup:
     
  6. ive just realised the stuff your talking about , i was involved with a south african guy who was trying to get koolduct off the ground in this contry many moons back but we were so bizzy and the product was new to this country so i passed it by , seem to remember heat wise it went up to about 80/90 c do they do a hotter one now ?? it was very versatile but their wasnt that many skilled fabricators or fitters around then , golly that bawt back a few memories ,i must see if i can find his card . :thumbsup:
     
  7. Just had a look at Koolduct....you could make the whole shooting match out of that:thumbsup:
    Rectangular baffle box, plus baffles, with round spigot inlet, then the duct to the van with a round spigot outlet.
    In fact, you could do both the hot air outlet and recirculated air intake side by side in the same box, with a divider down the middle, which would be not much bigger than the propex unit itself:thumbsup::thumbsup:....time to get the calculator out:thinking:
     
  8. check the fire regs for making it thou i cant remember but just check it out .
     
  9. well i read this and thought jesus you have brass BALLS TO ASK THAT , if i left me van ie put the petrol in give me time to take it to ye , let your men feck about with it for your benieft , the leAst ye can do is pay th eBLOODY COSTS ie the LOT , if iwasnt me me and yous ie the public , yed be looking for jobs too , brass neck , FECKING HELL THATS LIKE ASKING A CANCER PERSON TO SUCK ON PRETEND TABLETS , COME ON JOSH GROW A PAIR . OWEN NW
     
  10. Not sure what your point is exactly...:confused:
    but it sounds good:D
     
  11. I've read it a few times now, and I think I've got it....for JK to ask someone to allow them to fit Propex's latest underfloor heater to their bus, JK should do it for free...
    not taking the mick @shielsy ...I'm inclined to agree:thumbsup:
     
  12. Razzyh

    Razzyh Supporter

    I wasn't sure if propex was making the underfloor or if JK were making it?

    I think they sold the propex at normal price but JK paid for the extra stuff underneath and fitting. Not a bad offer as you effectively get free fitting, but could be better.

    I suspect if josh had said pay for a propex and get free fitting there may have been less complaints.
     
  13. Terrordales

    Terrordales Nightshift

    I'm going to tidy up & remove the posts that are not necessary on this thread.
    If you've got any complaints then let me know.
    Thanks everyone.
     
  14. rickyrooo1

    rickyrooo1 Hanging round like a bad smell

    what about this one?
     
  15. Terrordales

    Terrordales Nightshift

    Including this one.
     
  16. rickyrooo1

    rickyrooo1 Hanging round like a bad smell

    oh ok
     
  17. rickyrooo1

    rickyrooo1 Hanging round like a bad smell

    this one?
     
  18. rickyrooo1

    rickyrooo1 Hanging round like a bad smell

    if you remove all my pointless posts i'll be on zero.
     
  19. Terrordales

    Terrordales Nightshift

    That's the whole idea:thinking:
     
    shielsy likes this.

Share This Page