what do you mean sorry? i have removed the top of the a pillar where it goes to the roof connecting strengthener. Fu(k too late... their is only 1/2" play each way. I have some photos so I should be fine and i did not take any measurement.
does anybody know where or how I can make or get this top section of the a pillar outer skin top section and the inner roof strengthener piece.
any idea if i can use a LHD cargo floor on my RHD bus. Can I use a 1968-1972 cab floor on my 1974 kombi?
Yes to the cargo floor but you’ll need to weld a strip to the O/S to make up the gap to the side of the van and cut a bit off the N/S. I’ll dig out some pics for you. The cab floor won’t fit though as the arches are different (the cutout for the step differs). Sent from my iPhone using Tapatalk
This post may be of use: https://thelatebay.com/index.php?threads/a-restoration-for-iris.53455/page-11#post-1150135
does anybody have an opinion on these panels https://www.heritagepartscentre.com/au/211809167d-rear-wheel-arch-repair-left.html
They're currently the only repair panel available for that area. They've got a bit better in recent years as they used to come with lots of wrinkles. I fitted a pair to mine and it came out ok.
is the metal the same thickness as the original? I once bought a inner cab step and it was paper thin.
why don't you have a friendly chat with a few people that deal in VW's maybe they can advise on where to get a body cut http://skinnedknuckles.com.au/ http://aussiecarrecyclers.com.au/ There must be a davidoft over there!