Rebuilt the Weber ICT34 - new fuel pump. I haven't tuned yet just got it running and it doesn't sound right - any knowledgable ears recognise a problem? Checked carb bolts, fuel bolts all seem ok. Thanks
Before you take the belt off, check the “breast tin” - the small piece of tinware on the engine that sits behind the crank pulley. These are easy to bend, and can make a real racket if they’re touching the back of the pulley. Try pushing it in with your thumbs while the engine’s running.
Just checked all clear. Any chance the alternator is knackered - not sure how worn bearings sound? Cheers
Next step as above - take the fan belt off. That'll determine whether it's the fan or alt. The front alt bearings can wear, due to the load of the fan belt.
Did you look into the rear of the pulley, there are two flaps on the fin that extend into there. It sounds scratchy tin to me.
It sounds like its in time with the engine turning so its more likely to be the tinware. Or a bolt lying under the pulley.. If it was the fan it would be faster and would beat with the engine noises because it is spun faster.
Take fan belt off and see if noise is still there when you run it It also doesn't sound like its idling on 4 cylinders
.... funnily enough..... the HT was connected to cylinder 3..... Someone must have put it there when I wasn't looking....
Any tips to remove the nut securing the fan belt. Managed to lock off pulley but it is not shifting at all.....
Have a listen around the carb with a hosepipe to your ear, after all, it's the carb you've changed. So the odds have it, that it's new addition to the mix causing your problem. Listen out around the spindle, in particular. I have a whistling Weber on the Bug, well it's more of a chuffing noise timed to the cam.
Or as you don't have 3 hands, forget the one jamming it and use a ring spanner and hammer to shock it round. Works and the jamming thing is more for tightening.
Did you fit the washers to the manifold so not to loose them .... then fit the manifolds back on the heads with the washers still there