WANTED cylinder heads 2.0 2off

Discussion in 'Late Bay Parts Classifieds' started by Gnasha, Jan 14, 2020.

  1. Looking for 2 X 2.0 cylinder heads that may or may not need overhauling, must be crack free and fins intact.

    94mm bore.
     
  2. 77 Westy

    77 Westy Supporter

    105mm register diameter in the heads for 93mm, 94mm and 96mm bore cylinders. 1700 heads are 100mm diameter.
     
    Gnasha likes this.
  3. davidoft

    davidoft Sponsor

    I have some , have a long block , pm
    Me :)
     
    Last edited: Jan 14, 2020
  4. Vw evolution

    Vw evolution Sponsor

    I have some, what exhaust ports do you need?


    Sent from my iPad using Tapatalk
     
  5. Moo

    Moo

    Last edited: Jan 14, 2020
  6. Thank you
     
  7. I would prefer the copper gasket type
     
  8. davidoft

    davidoft Sponsor

  9. Moo

    Moo

    Without running back out in the lashing rain to check, a quick chat with Uncle Google says they should be 33 and 39mm valves. :thumbsup:

    They're the later type heads.
     
  10. does uncle Google say they use copper washers? :hattip:
     
  11. Moo

    Moo

    Ah, I see... the oval port heads used copper washers, but these are the later (78 on) heads which use the square other type washers.
     
    davidoft likes this.
  12. I have a pair of Oval Port heads. No cracks or broken fins etc. They are from a 1700cc. Easy to fly cut for 2ltr with the added advantage of bigger inlet valves for increased performance.
    Pm me if interested
     

Share This Page