Any idea where this part goes?

Discussion in 'Mech Tech' started by Pete The Greek, Aug 21, 2019.

  1. 99% finished on my westy Berlin resto...I've got this bit left!...I labelled the bag 'rear cupboard' but it might have got mixed up or fallen out of another bag...it's definitely from a westy Berlin interior though!
    Cheers .... IMG-20190809-WA0022.jpg
     
  2. Poptop2

    Poptop2 Administrator

    Rock n roll bed internal plate?
     
  3. Think there’s one on top of my rear cupboard, never tried to fit the interior though so it either attaches the rear cupboard to the bodywork or to the overhead locker
     
  4. Is it totally flat or a slight ‘kink’ above the holes? I think it might be the cupboard to chassis connector if it’s got a kink in it, if not it looks like sort of backplate to connect a couple of cupboards.
     
  5. MorkC68

    MorkC68 Administrator

    It’s 100% the top of the rear cupboard as you say. I’ve not long since refitted mine.

    You’ll see how the holes line up with the top cupboard side whilst the opposing holes line up with the bodywork via a self tapping screw.
     
    Last edited: Aug 22, 2019
    theBusmonkey likes this.
  6. mikedjames

    mikedjames Supporter

    A Westfalia 13mm hole support to keep all the spare holes in..
     
    nobayinhell and Valveandy like this.
  7. Cheers guys...will try to retro fit this weekend...hopefully don't need to take any cupboards back out...Completion photos to follow soon!...
     

Share This Page