Ok back at it. Manage to get som serious warping on the outer fender. Takes a lot of time and patience fore a rookie to sort it out. So after getting tired of hammering abs shrinking whit the torch. I started on the front footwell/ step? Or what it’s called Got a replacement part made by klokkeholm . It’s a horrible fit!! Does anybody know of another manufacturer of this pice?? All suggestion are welcome on how to solve this. Skickat från min iPhone med Tapatalk
Is this the part @crossy? @Andy76 ? https://www.alanhschofield.com/ourp...h-Inner-Step-Right-Repro-7279-211809508A.html
Yes. But I have the one whit outer and inner plates welded together from the factory. I was hoping to find another supplier of this part. Auto-craft hav the whole dogleg in oem quality. But it’s quite expensive. Skickat från min iPhone med Tapatalk
Those repair panels are awful and by the time you have made it sort of fit You will wish you had bought a whole arch.
Yes exactly what I’m starting to realize. Guess I have to open the wallet and spend som £ on a top Q dogleg instead of going mad trying to sort that piece of crap out. Skickat från min iPhone med Tapatalk
Early Christmas present arrived I the mail yesterday. Got some bad metal cut out. Found some more rot when I removed the old dogleg. Got to sort out the top hat and the outrigger to the jacking point. Skickat från min iPhone med Tapatalk
It’s been a while since my last post. But things has mowed forward slowly but steady. Starting to sort out the inside of the B pillar. //uploads.tapatalk-cdn.com/20190127/3fb9e32638cf1a5e8bf227152b51c06f.jpg Some new metal in the floor before I can start fitting the dogleg. Skickat från min iPhone med Tapatalk
Started to fit the dogleg yesterday. Starting to come along nicely. Does anyone have some input on the size of the gaps around my door? Skickat från min iPhone med Tapatalk
Decided to cut away the outer sill so I could clean out the inside. Got the inner sill and wheel housing blasted ready for some 2K epoxy tomorrow. Skickat från min iPhone med Tapatalk
Any good advices on how to clean out the space between the two remaining sills? The blaster can only reach closest to the holes when I put the blast nozzle in! ? Skickat från min iPhone med Tapatalk
Long time since last post. But work has continued. Tidying up the wheel well. And floor. Skickat från min iPhone med Tapatalk
Som more random pictures from the resto. Might not be in order. Replacing the outer sill. Skickat från min iPhone med Tapatalk
Not so good on the poetry. But pictures speaks a 1000 words Left back fender starting to come together. Have a lot of grinding and tidying up to do. Skickat från min iPhone med Tapatalk
I have to put in the overdrive. Plan to have it back on it’s wheels by spring Skickat från min iPhone med Tapatalk