I don't know how you do it. I'd would've set fire to it after finding it was 90% filler and 10% metal. At least now you know that a proper job will be done, probably a brilliant one given what I've seen of the stuff that you've done. Good Luck.
Front gear rod bush has seen better days Are decent ones of these available anywhere? I recall someone mentioning that they didn’t fit for some reason
Removed the handbrake lever and started to bare metal it I was having a hard time removing the paint with a wire wheel on the grinder I did the best I could and found quite a bit of pitting corrosion. This bit was full of underseal so I burnt it out with a blowtorch then scraped the remains out before cleaning it with kerosene soaked scotch pad It’s now soaking in the acid bath to remove the corrosion and when it comes out I’ll go over it with a poly strip and clean disc to remove the remaining paint