Well after a long search I have found project number 2 - The aim is to to a nice mild detailed camper - slightly lowered on spindles and springplates - Banded Steels - whitewalls etc - Loads and loads of detail throughout - Nothing Radical.
Work has begun the driver side cab floor was rotten all now repaired - I have also made some nice chassis legs
Well a little update - I have been busy on him lots of fabrication and welding - all new outriggers inner sill - chassis repairs - all on the drivers side all detailed lots of swaged panels - he has a new set of rims polished fuch rims - drop spindles - adjustable spring plates - whitwall tyres - and I have most of the panels - I hope to fit a new drivers side rear arch sunday and maybe get a little bit painted underneath so he is still underway - pics to come
Sorry for the delay i have been mental busy on other peoples dubs - well where are we with Dirty Bertie - - All of the off side underneath is repaired and detailed inner and outer sills outriggers - Replaced the o/s rear wheel arch repaired all of the window frames - Re skinned the drivers side door skin - Repaired the o/side roof gutter - scripted the tailgate - changed his grille from a late bay to an prototype bay - repaired the lower windscreen frame - Repaired the n/s cab floor - repaired the n/s under wheel arch and detailed - Just finished the outriggers on the n/side -
He will be better than Gladys he is a very subtle resto custom lots more classic detail a 70s throughback
Update finished the underside on the passenger side today all seam sealed and stone chipped - cut out his nasty rear arch and lower rear corner - so light at the end of the tunnel now - just the arch and lower corner and roof / gutter repair and 2 door skins to do he is solid then - just a couple of custom changes and then prep time
A little update with the progress on Bertie - all the underside is now welded - his passenger rear arch is now fitted as is the lower rear corner and the d post - it is now time to start the final rust repair his poorly roof - then back to to the nice little custom trick bits - a little sneek of his new fuel filler cap just one of the tricks to come
A bit more progress with him the passenger side roof an gutter and rear corner are all repaired - I have have also fabricated a new rear valance - As he is all solid now i have started on some subtle custom mods - He now has a Harley Davidson flush fit pop out fuel filler cap - More little trick bits to come
A bit more progress Bertie has his new scripted tailgate has had a trial fit - I have frenched his front number plate and had a trial fit of his hand fabricated overidders - tailgate on for a trial fit - all ok - I have found a few crusty bit on the cargo floor easy fix - Today i have modified his front bumper frenching in his number plate plus had the 1st fit of his hand fabricated overidders - with this done i can now move his bumper back tight to the front panel -
Tomorrow i will cut out these nasty little bits on his floor and replace them along with moving his front bumper back tight to the front panel and maybe start his nipple job
A good day on Bertie his cargo floor is all welded up and I have carried out a nipple transplant i have moved it down and inverted it the nose badge will now sit flush
Have you made the rear cross piece removable?! Like on a prototype bay.. any chance of your process if you have mate ? Sent from my iPhone using Tapatalk Pro
Well updaye time i have now sectioned the deformation panel allowing the bumper to tuck under the lip - i just need to radius the bumper to follow the front panel snug bumper - The skylight has been filled in with steel last cab door skined starting the body prep now