I'm in the process of fitting a ply roof lining, does anyone know the position of the channel the ply sits in. Exact measurements would be great.
Anyone with a Westy able to take a look for me. I need the measurement from the top of the window rubber to the bottom of the channel.
What year! Early and late are different. Mines a 73 with a front hinged roof aperture so probably same as a tintop. Can measure tomorrow.
Thanks everyone, I used this, going to try fitting the ply tomorrow, seems very tight tho! Got it from b and q about £4 per 8 ft length
Here's the roof so far. I f***** up the front bit, trimmed to much off! Any ideas what I can do here around the hinges?
In a Westy, well in mine at least, that bit doesnt have a ply roof section. The hinge bars get covered up by the headbanger rear ceiling unit
Sorry , not the best of pictures I cut a slot about 70mm wide with a semi circle towards the front You just need to check the rear door functions Alternatively fit the plastic hinge cores and carefully shape the ply around them use templates Sent from my iPhone using Tapatalk
Yes ! with a little manipulating. Just make sure you leave it long enough to glue on the rear Sent from my iPhone using Tapatalk
It took a little bit of trimming in places, I didn't manage to get the J rail in the original position..I need to remedy the mess I made of the front panel tomorrow!