Wide5 wheels adaptor plates that allow you or your shop to balance your wide5 rims. These are made from 1/4" A36 regular mild steel plate and have M12x1.5mm (for use with Bugs/Trekkers/Ghias) or M14x1.5mm (for use with Splitties/Early Bays) lug nut holes. Come either in Grey Primer or Red Oxide Primer or Matt Black finish. £45 each posted anywhere in UK. Plz specify what finish would you want one in and if you want M14x1.5mm adaptor or M12x1.5mm adaptor while ordering. A M14x1.5mm / M12x1.5mm combo adaptor is also available for an additional £10 (£55 for combo adaptor). Sent from my BlackBerry using Tapatalk
Do you make these? if you fancy doing four with the wide five threads tapped to take a wheel bolt and the centres drilled out to late bay PCD i'll have them
A M14x1.5mm / M12x1.5mm combo adaptor is also available for an additional £10 (so a total of £55 for a M14 / M12 combo adaptor). cheers
I dont see how it could be unsafe especially when it goes onto the inside of the wheel which then faces towards the balancer. However if you want a bare one, I can do that too. Now do you want a bare one then?
cheese & whiskers, where have you been buying your steel from. A36 mild steel's BS equivalent is BS EN10025 S275JR which is a standard constructional steel. We paid £65 plus vat for a 2m by 2m plate, 20mm thick from Corus