T25 clutch

Discussion in 'Mech Tech' started by lost-en-france, Dec 19, 2018.

  1. Aye up !

    Sooo I lost all drive with the T25 dg 1.9 5 speed ...

    Driveshafts ok before you ask


    I noticed the cylinder was leaking near the pedal (hydrologic clutch pedal) so I replaced it ,then bleeding it I noticed none came out of the bleed nipple (gearbox end) so I think that bit is goosed..

    But removing it I cannot understand why I still when I select a gear the van isn't moving...

    Am I'm been thick ?


    Sent from my iPhone using Tapatalk
     
  2. Brexit. It's Brexit.
     
    Ermintrude, Jack Tatty and crossy2112 like this.
  3. Are you sure it’s definitely in gear
     
  4. how did it lost the drive?
     
    paradox likes this.
  5. mikedjames

    mikedjames Supporter

    Clutch fluid all over the clutch disc ?
     
  6. Lost all drive as in you put it in gear and the van doesn't move, then clutch/gearbox/driveshaft cv joint or the splines in the hub have failed.
     
    snotty and mikedjames like this.
  7. but how that happened? driving?
     
  8. mikedjames

    mikedjames Supporter

    It was when he was playing Paris-Dakar in it and went airborne at 120km/h and popped a CV joint out when he landed..
     
    Jack Tatty likes this.
  9. davidoft

    davidoft Sponsor

    slave cylinder could have over extended and jammed
     
    Valveandy likes this.
  10. Splines?

    I suppose I'll have to look ,is it easier dropping the engine?


    Sent from my iPhone using Tapatalk
     
  11. Yes


    Sent from my iPhone using Tapatalk
     
  12. mikedjames

    mikedjames Supporter

    If the hub splines are gone the driveshafts dont turn on the failed side if the wheel is jacked up and rotated .
    Ir if you put it in gear with the handbrake on the driveshaft will spin on the knackered side
    If the CV joints are gone the boots will be confetti.
    Use logic.
    You dont need to pull the engine for 100% of the possible issues.. for all things downstream of the drive cups on the gearbox you can see the issue.

    But in the end you need to see the gearbox input shaft and see if you put in gear and turn the drive shaft or a wheel does the other end of the gearbox turn...
     
    lost-en-france and snotty like this.
  13. It was the clutch it had totally disintegrated ...


    Sent from my iPhone using Tapatalk
     
    davidoft likes this.
  14. davidoft

    davidoft Sponsor


    Has the same with a van I bought once, did nothing when put into gear didn’t make a sound or move in the slightest, clutch plate was just metal :eek:
     
  15. Poptop2

    Poptop2 Administrator

    If it's the Profi I'll pop over and give you a grand for it without the clutch :thumbsup:
     
    davidoft likes this.
  16. It's fixed now mate ,but you can have a go in this I found it the woods...

    [​IMG]


    Sent from my iPhone using Tapatalk
     
    Merlin Cat, mgbman, Poptop2 and 2 others like this.
  17. davidoft

    davidoft Sponsor

    That’s coooooolllll
     
  18. Brilliant.! What is it.? Love the suicide doors . Can you fit a Subaru motor in it . ,?!
     
  19. 77 Westy

    77 Westy Supporter

  20. What region is that ?

    I'm moving to the "Lot " region to live in a wood


    Sent from my iPhone using Tapatalk
     
    Last edited: Mar 2, 2019

Share This Page