Pretty much. Finished restoring the interior Anybody know what gas fitting I need to hook a 8mm flex gas hose up to the cooker ?????
Swapping a ply headliner to fabric Any hints on where to fit the gripper rods ??? Further down or as per the photo ...???
PROPEX heater in and my DIY electric panel made up no gas yet (still thinking about a home for it) but propex fan whirred up with 12 v.... plan to run the outlet the the exiting air vent so some Fabrication to do ? headliner next (waiting for a hot day)
working on a gas locker and the gas plumbing made a few diy interior panels for trim door cards and seats due in a month !!! came up with a solution for heater outlet without a new hole ...
Where can I get the plastic strips that go under the metal seat runners for front cab seats ? Don't seem to show up on jk or heritage
Anybody got a piece of laminate to match ? My units were ok but need to make a small table 65 by 35 cm Happy to pay but don't want a massive sheet !!!
some minor electrical confusion as I get to the end of the project... any suggest for the highlights below ? I have in :- RED LOOP 2 wires brown and white plus a brown and black , on large spades , they both come from the square multi plug under the black steering wheel support plate / temp removed in the shot below YELL LOOP - all small spade I think these all go the warning light on the dash ? red / black from brake servo / one for handbrake switch ? and an earth ? does it matter which order they go on the bulb (should do ?) cannot seem to find any common on the 4 small spades on the back of the dash bulb ? GREEN LOOP - small metal box ? has a heavy gauge red in ? but nothing out ????? not sure what this is? BIG BULLDOG ON DASH - pink / large spade .. comes from fuse box ?