I'm looking to cut an access panel to gain access to the top of the petrol tank on my 76 Bay, and a section of rear floor is required to make it. Any chance anyone has a large enough section of this area of the van for sale?
if you are careful you don't need a big bit. use a thin cutting disc(slitting disc) to cut the hole and then all you need is 2 strips 1" wide of corrugated floor cut for it too rest back onto. don't know if I have any pics of mine when I did it but I will have a look.........
I'm open to suggestions guys, nothings cut yet, pictures of the job being done in stages would be appreciated though, cheers.
On second thoughts, to save you hacking a bus to bits, I've found this. http://alanhschofield.com/ourparts/...-Inspection-Hatch-Repair-7279-211801551I.html If you have already hacked out the steel I'll still have it, just rather not put you to any mither if a product is already available.