Rebuilt Gearbox, Poor selection and noisy.

Discussion in 'Mech Tech' started by Patrick Nguyen, May 20, 2019.

  1. IMG_20190617_131124.jpg IMG_20190617_131602.jpg IMG_20190617_180920.jpg IMG_20190617_181408.jpg IMG_20190617_220849.jpg IMG_20190617_221435.jpg new quality bearings installed and intermediate housing stripped ready for re-machining of worn out bores.
     
  2. New mainshaft bearing, seals and intermediate housing bores restored (will need good clean now).



    IMG_20190622_195928.jpg IMG_20190626_213936.jpg IMG_20190626_214629.jpg IMG_20190626_213957.jpg
     
  3. Main shaft and pinion shaft:
    4.jpg
    3.jpg 2.jpg 1.jpg
     
  4. new relay ball and this early relay arm has been modified (beveled) to function like the very late ones - helps remove notchiness when going between 1/2 and 3/4.
    [​IMG]
     

    Attached Files:

Share This Page