Good morning folks. I must apologise, this is my first post and I am asking for help! I bought a new oil strsiner from GSF. This is the one I ordered from the Vee Wee parts and is confirmed on their invoice as the one supplied: The one they gave me does not have the solid metal hole in the centre. The hole is simply formed by the mesh. I had to push it on as the hole appeared a little small. I could feel the strainer move as is was pushed on. Am i right to be worried? The one they gave me looks a little like this: This is not on the Vee Wee web page, so I am not sure if I have the wrong one or if they have changed the design. Any help / advice would be welcomed!
http://www.vwheritage.com/vw_act_shop.product_pID_63820_lang_EN_country_GB.htm this is what you should have cant you just clean your old one up in parafin