WANTED Nuts & bolts I can't find

Struggling to find a few nuts and bolts. The first ones are for the rear hubs. I need two of these that I think are 35mm M14 x 1.5mm with the spring type washers.
They go here:

And look like this:


The other ones are plastic but stainless steel would work too. They go in the back where I presume some sort of rear seat belt might go:


And also in the floor:


I need 8 of them, I think they are 1.5mm M11 x 1.5mm and they look like this:


Does anyone have these or can somebody point me to a supplier please.
Thanks all.

 

Big bolt, I’m pretty certain I have , plugs perhaps a couple

 

Two of the big bolts would be great if you have them with the springy washers please. I have 3 of the plastic ones so really only need 5 if you have them please?

 

If Davidoft only has a couple of the plastic ones, does anyone else have any of these please or are they hens teeth? Oh and one more of the big bolts?

 

I’ll check, I might have some of the plugs.

 

Thank you. Appreciate it

 

Fir tree plugs are available from https://www.vital-parts.co.uk/fir-tree-plugs---ftp083-1834-p.asp If you want to replace the plugs with bolts, the worldwide standard for seat belt mountings is 7/16 UNF, not metric.

I think @paradox bought some of the swing arm bolts a year or so ago - although I might be wrong. Incidentally, the bolt grade should be 10.9, don’t use standard 8.8

 

I bought them from a fastener supplier on ebay

 

Do you have a link by any chance? I couldn't find one

 

I bought the long ones that have the nut on the other side
Don’t know how to do a link on my phone but they were from Spalding fasteners

 

@paradox did you find the correct spring washers too? I’m just putting together a shopping list of bolts as I’ve decided to replace them all rather than replate for piece of mind. The price of bolts from the vw suppliers is a joke so I’m sourcing from fastener suppliers but our local fasteners doesn’t do spring washers, only those split spring ones.


Sent from my iPhone using Tapatalk

 

There called crinkle washers
Plenty on eBay

 

Cheers. They seem to have about 5 different names. Will be ordering all the rear suspension bolts and bits tonight I hope.


Sent from my iPhone using Tapatalk

 

Thanks a million. I'll pay then a visit as Lincoln isn't far from me

 

Ah my local does sell them in A2 stainless. I assume that’ll be fine?


Sent from my iPhone using Tapatalk

 

Stainless is too brittle James. Wrong for thus application. You really need 10.9

 

Ah sorry I was referring to the washers, not the bolts. Will definately be getting the standard steel 10.9 jobbies for the bolts, is stainless for the washers ok?

 

Interesting one. Not sure but I would say so.

 

Washers should be same grade as bolts / nuts, otherwise if they are softer will squash and the set torque will not be maintained . I bought some for my trailing arms and had to buy minimum quantity, so got some left over, if your interested could sort some thing out ?

 

I could do with 2 please Steve.