FOR SALE Nice pair of Bilstein gas shocks (and "KYB Gas-a-just" pair)

Took these off to get back to standard on "Elmo" ...
The Bilstein are in very good shape.
Code is F4-B46-0032-H0
which means nothing to me, but apparently they're "sweeeeet" for a lowered bus!
Hole centre to hole centre off the bus is 385mm
Same as here I think:
(I get a blank page that needs tapping with this link)
they they're selling at £126 for one

www.eurocarparts.com/search/935441090?gclid=Cj0KCQiAlpDQBRDmARIsAAW6-DMZGb9pdqlgiw8h3s-91GFz0fWKumLqF3-gdmcBwLtrMgmKKQ9yHNcaArThEALw_wcB

Also here:
that they're selling at £94 for one

https://www.extreme-carstyling.co.u...Qz5P7W7lV6JIaRNktIhrIPLl8OX6RsaAaAmmoEALw_wcB

Only other PAIR I could find were new, selling privately, on eBay.de. in August for 150 Euro. (£132)
The others are KYB "Gas-a-just" ...
555mm centre to centre off the bus.
Stamp reads KG5530 B607 K
Clearly not the dogs as a make judging by a quick bit of googling, (though there seem to be a few off road wing nut heads who rate them)
Basically the same as these
(though ? length definitions)
https://www.vwheritage.com/ac413kg4521-shock-kyb-gas-a-just-double-loop-410-265mm-each

that they're selling at £63 for one

I also took heavy duty anti roll bars for front and rear off a 71 Deluxe which would finish the job ...
180 + post for the whole kit.

 

I'll take the heavy duty anti-roll bars if you will post them .
Cheers

 

For other's reference ... @just-paul replied on the basis of the original (slightly misleading ) post, which has now been edited.
I'd rather not get into doing three or four sets of packaging!

 

I really don't need these.
Any would-be slammers out there!
Open to offers, and MAYBE splitting them up, in which case preferably for collection ... (and the individual pricing would be higher)

 

price for just the bilsteins?

 

Erm ..... £90 posted

Sent from my Moto G (5) using Tapatalk

 

Hi interested in the front shocks what is the very best price for the pair please

 

£90 looking about right still, thanks

 

Any pictures of the anti-roll bars ?

 

'Ere we go! ... Getting hang of this now
I'd say they were about 20mm diameter.
(PS, sorry, I forgot I was supposed to send you this ...)



Sent from my Moto G (5) using Tapatalk

 

Do you have all the brackets for fitting the rear one ?
How much including post to Co.Durham ?
Cheers

 

I'll have a root about in a couple of boxes I've got here but let's assume not, and if I find them it'll be the same amount anyway ... as in my PM: £80+ whichever best p&p I can find

 

All still here

 

Haiku (as vaguely promised):

"This pair of Bilsteins
Is still lying around here.
Offers considered."