Name those holes !!

Discussion in 'General Discussion' started by Diddymen, Sep 10, 2011.

  1. After seeing some one post some pics of thier holes ..........not that sort you dirty lot!!!

    I thought I'd post some pics of holes that I dont know what they are for, if they are not original then Im going to weld them up so any suggestions please (keep it clean ;D)

    first one on the upper B post RHD driver side ....and whats that top hat type bit for whilst your looking??

    [​IMG]

    next the holes on the post between the side windows .....what are they for? should I keep em or weld em up??? and whats the capped off one for? middle seats - seat belt?

    [​IMG]

    theres more but I wont post them all as I might get confused which ones were talking about ;D

    but I will ask what is this catch for on the C post (sliding door side) ;D

    [​IMG]

    thanks for looking ;D
     
  2. Birdy

    Birdy Not Child Friendly

    These buses had so many uses and so many extras and options depending on the market for one thing or another so it isn't easy to pin point what they are all for. However you are missing grab handles that are on the C posts like in my bus.

    I wouldn't recommend filling them as they will give you access to fill those sections with waxoyl.
     
  3. I did wonder about grab handles on the C post or curtain tie backs

    not sure if thats right or what the lower on is for on the C post

    have you got any pics of where your grab handles bolt to??
     
  4. Birdy

    Birdy Not Child Friendly

    I haven't but I'm sure there maybe a glimpse of one in the brochure section. When I get the bus out next I'll try and get a picture.
     
  5. The top hat's a coat hook.
    Clip looks like it's from some conversion.
    Threaded holes in the posts are either grab handles or seatbelt mounts (in bus config?)
    Cheers
    s
     
  6. MorkC68

    MorkC68 Administrator

    ^ & just below the top hat should be a seatbelt hook...the westy hs em fitted!
     
  7. My coat hook knob (top hat) is in the empty hole next to where your hook is.
    Mine is a Westy and has a bit of faux wood trim/valance thing that covers the tops of the curtains.
    With my wood up, it blocks the hole where yer knob is.
    I think the second hole is just another option for where to stick yer knob if say your bus turns Westy and can't get it's knob in the proper hole due to the afore mentioned wood problem.
    What? ::)
     

Share This Page