MIG gas leak

Discussion in 'Mech Tech' started by Coco, Mar 27, 2020.

  1. mikedjames

    mikedjames Supporter

    The BOC bottles have a brass taper for instance, which has to be clean and then the nut has to be done up tight.
    That was the type I was thinking about..
     
  2. I'll try!
     
    davidoft likes this.
  3. Merlin Cat

    Merlin Cat Moderator

    I use gas Ptfe tape, it’s a bit thicker.
     
    snotty and davidoft like this.
  4. The new regulator seems to work without leaking. Thanks again folks.
     

Share This Page