Looking for information

Discussion in 'General Discussion' started by grimreaper, Nov 2, 2019.

  1. Hello I been lurking around for a while now and my van is nearly ready to be back in the road . The problem I have I need to find a some one local that can have a look at the electrical on my van . I live in Gateshead in Tyne &wear and my van is in a workshop and I just need to know if there is anyone local.
    Thanks for any help
    Simon
     
  2. Merlin Cat

    Merlin Cat Moderator

  3. Do you mean the standard van wiring or mains hook up etc ?
     
  4. Yes just a standard loom . I think I have all lights and others the only thing is the wiper motor and the engine is where I'm having problems
     
  5. 77 Westy

    77 Westy Supporter

    This might help for the wipers – RIP Jim - http://www.speedyjim.net/schem/wiper.htm

    You have aftermarket carbs so the factory engine wiring isn’t really applicable and what’s left is very simple – what are you having problems with? The Type 4 alternator has an external regulator mounted on the bulkhead; do you have that?
     
    snotty likes this.
  6. If you have a new Brazillian wiper motor this may help vw t2 new wiper motoer in old van wiring diagram.jpg
     
  7. Thanks yea I have the reg on the bulkhead just seems a lot of wires left over .
    The engine now has twin Weber 34s and also I have removed the fan that feed the heat exchangers. So I now have all the wires of that and also I want to put electronic ignition on it . It all seems like my head is going to blow
     

Share This Page