it's a '75 panel conversion.louvered kitchen window,full ragtop(no leaks)1600cc t/port.standard ride height.....what needs doing is mainly welding....battery tray needs doing,the rear corners have been done(filler blowing a bit.needs refinishing)1 rear arch.bottom of front panel.bottom of slider.bit of gutter,outriggers all good but 1or2 jacking points need doing.....no bumpers/interior. Bottom of front doors,front arches,steps are all good. It sounds a lot welding BUT someone who knows what theyre doing,could do it in a long weekend. The engine and box are spot on and it drives fine..all the electrics work.got v5 and some paperwork. Kellie Any more Q's. Phone...07831568954. Best to come and have a look.swindon Wiltshire £2500 Ono or swap with auto t4 or t25 can add cash but not looking to spend much more
firstly welcome to the site, good luck with the swap/sale - you might be better off on ebay though I doubt many of us have a t4 or t25 to swap, looks like it needs a fair bit of work
Thanks I'm not really bothered if I get a swap as we do have a fair few dubs :/ but I'd thought I chance it don't ask don't get I've tried ebay just full of dreamers and time wasters which I can't be asked with some one recommend this site to me so I thought I'd give it a shot
ahhh ok, well we do have a few people looking for cheap bays but probably cheaper than that, good luck anyway
Hi, Is it a RHD or LHD? Does the roof have a large open hole? This could be something I would be interested in depending if it was all legal and engine capable to drive through to Spain?
