After removing the spark plugs on my 76 2L bus to do a compression test and putting back together the bus now refuses to start.Do not know if I have done something stupid (probably) Need to check I have the ht leads in correct position any pictures or diagrams about ? If any body has other things to check please do ,engine was running not well but starting hence compression test.Thanks Sent from my A0001 using Tapatalk
Back to basics .. Get cylinder 1 on compression and line that up with lead #1 same with the rest in firing order . (Although it should pop and bang if the leads are mixed up.) I'd go for a loose electrical connection - check all connections for the coil and dissy are good . Sent from my SM-G960F using Tapatalk